801.973.4017

Wakesurfers

Wakesurfers

Items 1 to 50 of 54 total

per page

Page:
  1. 1
  2. 2
  • Eight.3 Surf Shaper Unit Velcro XL Kit 2-Piece (2018)

    DETAILS -2 piece velcro -For XL Size shaper -Replacement velcro Kit -Strong Adhesive on velcro Learn More
  • Eight.3 Surf Shaper Boat Velcro STD Kit (2018)

    DETAILS The supplied Eight.3 Wakesurf Shaper Velcro strips will replace the boat side with this kit. Description This kit includes the hook strips for the boat side of the velcro. The soft loop side will already be attached to your wakesurf shaper. We know that accidents happen and the Wakesurf Shaper may need to adjusted or removed from time to time. This kit will get you back on the water faster. Be sure to clean area first to ensure best adhesion. Once installed allow up to 24 hours before you hit the lake in order for the adhesive to cure. These high quality Velcro strips can be easily removed when using the surf device on a new boat. This kit includes four strips that measure 4” tall by 21” long. Learn More
  • Eight.3 Surf Shaper Boat Velcro XL Kit (2018)

    DETAILS The supplied Eight.3 Wakesurf Shaper Velcro strips will replace the boat side with this kit. Description This kit includes the hook strips for the boat side of the velcro. The soft loop side will already be attached to your wakesurf shaper. We know that accidents happen and the Wakesurf Shaper may need to adjusted or removed from time to time. This kit will get you back on the water faster. Be sure to clean area first to ensure best adhesion. Once installed allow up to 24 hours before you hit the lake in order for the adhesive to cure. These high quality Velcro strips can be easily removed when using the surf device on a new boat. For XL Size Shaper. Learn More
  • Eight.3 1" Shim For Wakesurf Shaper (2018)

    DETAILS If you have a boat with a little more curve toward the bottom of the hull grab another Eight.3 Shaper 1" boat shim. Description Manufacturer's Description: Every boat hull shape is different and some have a slight step in the hull that may require another smaller 1” shim for that perfect fit. Be sure to measure the mounting location that is both the furthest back and at the lowest corner of your hull to gauge what set up you need. Learn More
  • Eight.3 2" Shim For Wakesurf Shaper (2018)

    DETAILS If you have a boat with more lip on the bottom of the hull grab another Eight.3 Shaper 2" boat shim. Description Manufacturer's Description: Every boat hull shape is different and some require another larger 2" shim (2003-2011 MasterCraft X-Star wakesurf boats). Be sure to measure the mounting location that is both the furthest back and at the lowest corner of your hull to gauge what set up you need. Learn More
  • Regular Price: $330.00

    Special Price $199.99

  • Radar Fifty50 Surfer Yellow/Blu Craz (2018)

    Key Features: • Machined EVA concave pads with arch support and extra tall tail kick • Handmade by Robots Vacuum bagged with epoxy resin Learn More

    Regular Price: $239.99

    Special Price $219.99

    View Details

  • Hyperlite Ripper 45" (3-9) Wakesurfer (2018)

    KEY FEATURES: MONOCOQUE CONSTRUCTION Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts to prevent delamination. LAYERED GLASS Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year. MACHINED EVA TRACTION ROLLED EDGE PROFILE MINIMAL ROCKER / DUAL CONCAVE BASE SQUASH TAIL DESIGN - KIDS SPECIFIC 100% E-CORE Learn More

    Regular Price: $275.00

    Special Price $249.99

  • CWB Bad Habit Wakeskimmer (2017)

    FEATURES • Low profile skim design • Compression molded w/Vector net • Flat base • Single 1'' center fin • CNC diamond cut EVA pad w/kicktail • Designed for: Advanced/Expert Learn More

    Regular Price: $549.99

    Special Price $249.99

    View Details

  • Liquid Force Grommi Skim Wakesurf (2018)

    Key Features: -Compression Molded PU core Design -Rounded Diamond Tip Shape -Beveled Rail Edge - Nose through Mid-Section -Single Concave into Slotted Tail Channel -Versatile 3 Fin Options -Large Grooved EVA Deck Pads Learn More
  • Inland Surfer IKA Beginner Surfer (2017) 4-6

    Key Features: Ability Level: Beginner to Intermediate Rider Weight Range: 70 to 200+ lbs. depending on wake size. Specs: 4’6” x 20” x 1” - 8 lbs. Fins: Dual fin setup. Includes one pair of 6cm ABS Delta skim fins. Learn More

    Regular Price: $379.00

    Special Price $259.00

  • CWB Bentley Wakesurfer (2017)

    FEATURES • Long sidecut/Tapered tail • Skim/Surf hybrid • Hand crafted epoxy • Flat base • Twin 3.6'' fin setup • Diamond cut EVA pad w/kicktail • Designed for: Intermediate/Advanced Rides as smooth as the car Learn More

    Regular Price: $349.99

    Special Price $279.99

    View Details

  • Hyperlite Gromcast 45" (3-9) Wakesurfer (2018)

    Key Features: MONOCOQUE CONSTRUCTION Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts to prevent delamination. LAYERED GLASS Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year. MACHINED EVA TRACTION ROLLED EDGE PROFILE MINIMAL ROCKER / DUAL CONCAVE BASE SQUASH TAIL DESIGN - KIDS SPECIFIC Learn More

    Regular Price: $320.00

    Special Price $279.99

  • Obrien Tesani Wakesurfer (2017)

    Key Features: PVC core and aerospace grade. Hand-shaped epoxy surfboard construction, light weight / high buoyancy make these boards super responsive behind the boat. Learn More

    Regular Price: $499.99

    Special Price $299.99

    View Details

  • Liquid Force Rocket Comp. Mold Wakesurf (2017)

    Key Features: -Winged Swallow Tail -Compression Molded Design -Single-to-Double Concave Hull -Interchangeable 2+1 Fin Set-Up -Larger EVA Deck Pad with full coverage Learn More
  • Eight.3 Wakesurf Shaper (2016)

    With Wakesurf Shaper you can now get into the modern day surf game if you have an older boat, or if you have a newer boat you can replicate a tube rivaling your favorite break in the South Pacific. 2 years after the inception of Eight.3, we have come up with something that revolutionizes the outside of your boat - The Wakesurf Shaper. This device easily mounts to the lower/back point of the starboard or port side of your boat hull for a premier surf wake on either side. We have tested from every aspect of boating - waterski boats, crossover boats, older V-Drives, newer V-Drives, - one thing is constant, this is a game changer. Never has there been this type of aftermarket device that can so easily be mounted to the side of the hull - that makes this kind of difference. With a built in handle it is easy to move to either side of your boat, and is best primed with some loaded Eight.3 ballast. Learn More

    Regular Price: $399.99

    Special Price $314.99

  • HO SPORTS FAD 4' (2018)

    Key Features: -Dual fins for carving control -Durable Drop Stitch Construction -Pull Strap Pull up strap for easy re-boarding -Machined EVA Traction Traction pad for unsurpassed foot grip -Multiple Riding Options Kneel, Lay, Stand, or Sit- multiple riding options -FAD Pump specific pump included -Nylon Handle For steering when the handle is docked in the handle hook -PSI Capable of holding up to 20 PSI Learn More

    Regular Price: $380.00

    Special Price $329.99

    Will be shipping soon

  • Byerly Speedster Comp. Mold Wakesurfer (2018)

    Key Features: BIOLITE 3 The secret recipe we have been perfecting since day one. This core material is the gold standard in the industry and used throughout our line. Bio 3 is our lightest and most durable formula to date. LAYERED GLASS Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year. MINIMAL ROCKER / DUAL CONCAVE BASE COMPRESSION MOLDED FIVE FIN PLACEMENT OPTIONS OPTIONAL TIP FIN DIE CUT EVA PAD Learn More

    Regular Price: $440.00

    Special Price $399.99

    View Details

  • Obrien Vader Wakesurfer (2017)

    Key Features: PVC core and aerospace grade carbon fiber layup. Hand-shaped epoxy surfboard construction, light weight / high buoyancy make these boards super responsive behind the boat. FCS compatible inserts allows any fcs style surf fin to fit the board. Learn More

    Regular Price: $699.99

    Special Price $399.99

    View Details

  • Eight.3 The Blade 138 Wakesurf Shaper Concave Suction Cup (2018)

    Key Features: 138 ORIGINAL CONCAVE W/ ADHESIVE FASTENERS Displacing the same amount of water as the Blade model using suction cups. This unit is preferred for users that do not have a flush surface area to mount to their boat in the intended spot, or just want a reference point to attach their unit on too. Based off the original design that started the whole craze of aftermarket surf enhancing devices. Trust the original makers. Dimensions 12” - Boat Surface Length 15.5” - Water Surface Length 10” - width For installation - we recommend the Wakesurf Shaper is 80% subgmerged when boat is properly weighted and as close to the stern as your hull will allow. Learn More
  • HO SPORTS FAD 4.5' (2018)

    Key Features: -Dual fins for carving control -Durable Drop Stitch Construction -Pull Strap Pull up strap for easy re-boarding -Machined EVA Traction Traction pad for unsurpassed foot grip -Multiple Riding Options Kneel, Lay, Stand, or Sit- multiple riding options -FAD Pump specific pump included -Nylon Handle For steering when the handle is docked in the handle hook -PSI Capable of holding up to 20 PSI Learn More

    Regular Price: $429.99

    Special Price $399.99

  • Eight.3 Wakesurf Shaper STD (2018)

    SHIM OPTIONS The shim is a simple attachment between the Wakesurf Shaper and a boat’s hull. Every hull shape is different some are mostly flat and don’t require a shim. Others have a step hull and require a 1” shim – other boats have a more pronounced step and need a 2” shim, while in some cases you might need both shims to make a 3” gap between the hull and your Wakesurf Shaper. For installation we recommend the Wakesurf Shaper is 80% subgmerged when boat is properly weighted and as close to the stern as your hull will allow. WAKESURF SHAPER PLACEMENT The adhesive fastener strips that attach to the boat are intentionally 6” longer than the Wakesurf shaper. This allows for further adjustment towards the bow or the stern of the boat greatly altering the shape of the wake. When closer to the stern, the wake becomes steeper, and deeper – closer towards the bow and the wake gets a longer sweet spot – who says you can’t surf tandem? Learn More

    Regular Price: $599.99

    Special Price $399.99

  • Liquid Force Happy Pill Wakesurf (2017)

    Key Features: Short, stubby Squaretail Shape Full volume outline allows you to ride a small, quick board. -Lightweight EPS Core w/ Epoxy Shell Precision milled core hand finished to perfection -Single-to-Double Concave Hull Efficient flow and effortless glide -Versatile Fin Setup Options Ride it as a Twin, a Tri, or a Quad w/ regular small rear fins or “Stubbies” for looseness -Front and Rear EVA Grooved Traction with Archbars & Kickstops Lock your back foot against the rear wedge for ultimate control and grip Learn More

    Regular Price: $499.99

    Special Price $424.99

    View Details

  • Hyperlite Shim Blk/Blu/Yellow Wakesurfer (2017)

    CONSTRUCTION FEATURES Dura-Shell Construction EPS Core Futures Fin System Single Concave Base Contour Mellow Tail Channels Molded EVA Pad Monocoque Construction Layered Glass Learn More

    Regular Price: $549.99

    Special Price $429.99

    View Details

  • HO SPORTS FAD 5' (2018)

    Key Features: -Dual fins for carving control -Durable Drop Stitch Construction -Pull Strap Pull up strap for easy re-boarding -Machined EVA Traction Traction pad for unsurpassed foot grip -Multiple Riding Options Kneel, Lay, Stand, or Sit- multiple riding options -FAD Pump specific pump included -Nylon Handle For steering when the handle is docked in the handle hook -PSI Capable of holding up to 20 PSI Learn More

    Regular Price: $495.00

    Special Price $449.99

  • Eight.3 Wakesurf Shaper XL (2017)

    SHIM OPTIONS The shim is a simple attachment between the Wakesurf Shaper and a boat’s hull. Every hull shape is different some are mostly flat and don’t require a shim. Others have a step hull and require a 1” shim – other boats have a more pronounced step and need a 2” shim, while in some cases you might need both shims to make a 3” gap between the hull and your Wakesurf Shaper. For installation we recommend the Wakesurf Shaper is 80% subgmerged when boat is properly weighted and as close to the stern as your hull will allow. WAKESURF SHAPER PLACEMENT The adhesive fastener strips that attach to the boat are intentionally 6” longer than the Wakesurf shaper. This allows for further adjustment towards the bow or the stern of the boat greatly altering the shape of the wake. When closer to the stern, the wake becomes steeper, and deeper – closer towards the bow and the wake gets a longer sweet spot – who says you can’t surf tandem? Learn More

    Regular Price: $649.99

    Special Price $449.99

  • Brigade Tamerindo Skim 54 Wakesurfer (2017)

    Key Feature: It is available in 54” with a weight range of (90-175lbs) and available in 58” with a weight range of (150-210lbs). Tamarindo Specs: 54” & 58” Skim True Bamboo Top Deck w/ Graphic Inlay Bottom EPS 2-lbs /Epoxy Resin (Light and Strong) Fin Set-up (Single) - Futures TMF-1 Tail Shape - (Pin Tail) Learn More

    Regular Price: $649.99

    Special Price $449.99

  • Byerly Action 56" (4-5) Wakesurfer (2017)

    SHAPED BY SCOTT "BUTCH" BOUCHARD Every shape in the Byerly line is marked with Shaped by Scott "Butch" Bouchard. Byerly and Butch's longtime friendship and collaboration has produced some of the most popular shapes in the history of wake. Innovations like 3-Stage rockers and Molded-in fins have all come out of Mr. Bouchard's shaping room. Each board featured in the Byerly line was created and shaped by hand from a single piece of foam, designed to the exact specifications of the team. Over the years Butch has not only shaped each board but also designed and perfected every construction and lay-up within the line. You can be assured that any Byerly board shaped by Butch is the most progressive product in the industry. MONOCOQUE CONSTRUCTION Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts thus preventing delamination. Learn More

    Regular Price: $649.99

    Special Price $449.99

    View Details

  • CWB Katana Wakesurfer (2017)

    FEATURES: Quad fin customizable setup Surf style design Hand crafted epoxy with vector net Center channel in tail Two 3'' and two 2'' surf fin setup CNC diamond cut EVA pad w/ kicktail Designed for: Advanced/ Expert Learn More

    Regular Price: $599.99

    Special Price $489.99

    View Details

  • Liquid Force Dart Wakesurfer (2017)

    Key Features: -CNC milled / hand finished lightweight EPS wood stringered core -Dual layer top glass w/ Innegra tail reinforcement -Single layer base glass w/ Carbon stringer -Wide Squaretail w/ Single Concave Hull -Square Grooved EVA Front & Rear Deck Pad w/ molded kickstop and archbar -Five Fin Option - comes w/ 2 large side fins, 2 Stubbie 2.0s, and 1 center fin Learn More

    Regular Price: $699.99

    Special Price $499.99

    View Details

  • Hyperlite Shim Red/Yellow 5-3 Wakesurfer (2018)

    Key Features: LAYERED GLASS Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year. DURA-SHELL CONSTRUCTION EPS CORE SINGLE CONCAVE BASE CONTOUR MACHINED EVA TRACTION LAP CONSTRUCTION MELLOW TAIL CHANNELS Learn More

    Regular Price: $550.00

    Special Price $499.99

    View Details

  • Liquid Force EL Guapo Wakesurf (2017)

    Key Features: -CNC Milled EPS Foam Core With Wood Stringer -Single To Double Concave Hull With Beveled Rails At Nose w/ Tip Concave -Full EVA Deck – Nose To Tail -2 Layers Of 6 oz Glass On Deck, 1 Layer On Hull -Beautiful Full Color Inlaid Graphic Base Adjustable Center 6.5” Longboard Style Single Fin Learn More

    Regular Price: $699.99

    Special Price $499.99

    View Details

  • Ronix Koal Classic Fish White Blk Splatter (2017)

    Key Features: • Machined EVA concave pads with arch support and extra tall tail kick • Ronix exclusive Fin-S system • 2 - 4” and 1 - 3” symmetric fins • Handmade by Robots Vacuum bagged with epoxy resin Learn More

    Regular Price: $599.99

    Special Price $499.99

    View Details

  • Hyperlite Shim Green/Yellow 4-7 Wakesurfer (2018)

    Key Features: LAYERED GLASS Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year. DURA-SHELL CONSTRUCTION EPS CORE SINGLE CONCAVE BASE CONTOUR MACHINED EVA TRACTION LAP CONSTRUCTION MELLOW TAIL CHANNELS Learn More

    Regular Price: $550.00

    Special Price $499.99

    View Details

  • Liquid Force Super Tramp Wakesurf (2018)

    Key Features: -Carbon Innegra Reinforced Deck -Single Concave to Slight Double Concave Hull -Sharp Rails -Concave Deck Surface for More Board Control -Single Center Skim Fin -EPS Foam Core W/ Stringer -Square Grooved EVA Pads with Kick-Stop and Archbar Learn More
  • Ronix Koal W/Technora Clipping Collage Lunatic (2017)

    Key Features: • Machined EVA concave pads with arch support and extra tall tail kick • Ronix exclusive tooless Fin-S 2 system • Fiberglass cupped asymmetrical fins - 1 symmetric 3.5” and 2 asymetric 4.5” • Handmade by Robots Vacuum bagged with epoxy resin Learn More

    Regular Price: $749.99

    Special Price $599.99

    View Details

  • Hyperlite Quad 59" Wakesurfer (2018)

    Key Features: LAYERED GLASS Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year. NEW FOR 2018! CARBONETX INLAY DURA-SHELL CONSTRUCTION 360 DEGREE ABS SIDEWALL EPS CORE FULLY MACHINED EVA TRACTION PAD LAP CONSTRUCTION ROLLED EDGE PROFILE TIP / TAIL FLOW CHANNELS Learn More

    Regular Price: $675.00

    Special Price $599.99

  • Hyperlite Quad 55" Wakesurfer (2018)

    Key Features: LAYERED GLASS Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year. NEW FOR 2018! CARBONETX INLAY DURA-SHELL CONSTRUCTION 360 DEGREE ABS SIDEWALL EPS CORE FULLY MACHINED EVA TRACTION PAD LAP CONSTRUCTION ROLLED EDGE PROFILE TIP / TAIL FLOW CHANNELS Learn More

    Regular Price: $675.00

    Special Price $599.99

  • Ronix Koal Womens Fish (2018)

    KEY FEATURES: • Machined EVA concave pads with arch support and extra tall tail kick • Ronix exclusive tooless Fin-S system • Fiberglass cupped asymmetrical fins • Handmade by Robots • Vacuum bagged with epoxy resin THICKNESS: STANDARD RAIL: FULL Learn More

    Regular Price: $659.99

    Special Price $629.99

    View Details

  • Hyperlite Time Machine 4-11 Wakesurfer (2018)

    Key Features: LAYERED GLASS Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year. DURA-SHELL CONSTRUCTION EPS CORE LAP CONSTRUCTION FULL CORK TOP DUAL CONCAVE FORE BODY CHOP TIP DESIGN LAP CONSTRUCTION ROLLED EDGE PROFILE TIP / TAIL FLOW CHANNELS Learn More

    Regular Price: $730.00

    Special Price $649.99

  • Byerly Action 54" (4-5) Wakesurfer (2018)

    Key Features: SHAPED BY SCOTT "BUTCH" BOUCHARD Every shape in the Byerly line is marked with Shaped by Scott "Butch" Bouchard. Byerly and Butch's longtime friendship and collaboration has produced some of the most popular shapes in the history of wake. Innovations like 3-Stage rockers and Molded-in fins have all come out of Mr. Bouchard's shaping room. Each board featured in the Byerly line was created and shaped by hand from a single piece of foam, designed to the exact specifications of the team. Over the years Butch has not only shaped each board but also designed and perfected every construction and lay-up within the line. You can be assured that any Byerly board shaped by Butch is the most progressive product in the industry. MONOCOQUE CONSTRUCTION Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts thus preventing delamination. Learn More

    Regular Price: $735.00

    Special Price $649.99

    View Details

  • Inland Surfer Swallow V2 (2017)-5-3

    Ability Level: The ability level recommendation for this board is intermediate to advanced. Weight Range: The weight range recommendation for this board is 100lbs. to 250+lbs. depending on wake size Specs: 5’3” x 20.5” x 1.75” - 8 lbs. Quad fin option. Note: All surf style boards come with 1 pair of standard 9cm surf fins only. Encased in White Dyed Carbon Fiber the fastest down-the-line wake surfer includes beautiful graphics with a vertical split deck & hull in orange and white with a beautiful shining finish. With the STEPtech, Vortex Channel and DropV Tail, the Swallow is our most engineered surf-style performer. The Swallow is designed for huge snaps, aerials and high-speed aggressive ocean-inspired riding behind your boat. If you own and love a Blue Lake, this is the next progression in a modified Gun shape with an authentic Swallow tail. Learn More

    Regular Price: $799.00

    Special Price $680.00

  • Ronix HoneyComb Orange/Yellow Powertail (2017)

    Key Features: • Machined EVA concave pads with arch support and extra tall tail kick • Ronix exclusive tooless Fin-S 2 system • Fiberglass cupped asymmetrical fins - 1 symmetric 2.5” and 2 asymetric 3.5” • Handmade by Robots Vacuum bagged with epoxy resin Learn More

    Regular Price: $849.99

    Special Price $689.99

    View Details

  • Liquid Force Dart Wakesurf (2018)

    Key Features: -CNC EPS Foam Core W/ Stringer -Dual layer Top Glass W/ Innegra Tail Reinforcement -Carbon Tape Down Spine -Single Concave Hull -Deck Pad W/ Molded Kickstop and Archbar -Five Fin Option - Comes W/ 2 Large Side Fins, 2 Stubbie 2.0s, and 1 Center Fin Learn More
  • Ronix Koal W/Technora Thumbtail+ Yellow/Grey/Paint Drip (2018)

    Key Features: • Machined EVA concave pads with arch support and extra tall tail kick • Ronix exclusive tooless Fin-S 2 System • 1 Fiberglass symmetrical 3” fin • Handmade by Robots • Compression Molded THICKNESS: DRIVE RAIL: FULL Learn More

    Regular Price: $729.99

    Special Price $699.99

    View Details

  • Hyperlite Hi-Fi Wakeskim 53"(4'5") & 56"(4'8") (2018)

    KEY FEATURES -DURA-SHELL CONSTRUCTION -360 DEGREE ABS SIDEWALL -CARBON COMPOSITE CONSTRUCTION -EPS CORE -MINIMAL ROCKER / FLAT BASE -PINTAIL DESIGN -FULLY MACHINED EVA TRACTION PAD Learn More

    Regular Price: $770.00

    Special Price $699.99

    View Details

  • Liquid Force Keen Wakesurf (2018)

    Key Features: -Carbon Fusion Deck -Precision Milled EPS Foam Core W/ Stringer -Triple Fin Box Option W/ 3 Small Skim Fins -Clean, Single Concave Hull w/ Crisp Rails From Nose to Tail -Square Grooved EVA Traction Pads Learn More
  • Ronix Koal PowerFish W/Technora Metallic Blue/Wht (2018)

    Key Features: • Machined EVA concave pads with arch support and extra tall tail kick • Ronix exclusive tooless Fin-S 2 system • 2 - 4.0” Epoxy Molded Asymmetrical Fins and 1 - 3.5” Epoxy Molded Symmetrical Fin • Handmade by Robots • Compression Molded THICKNESS: DRIVE RAIL: BLENDED Learn More

    Regular Price: $729.99

    Special Price $699.99

    View Details

  • Hyperlite Automatic Surfer Brian Grubb Pro 5-0 (2018)

    KEY FEATURES LAYERED GLASS Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year. NEW FOR 2018! EPS CORE FULL CARBON DURASHELL+ CONSTRUCTION SEAMLESS RAIL FINISH SINGLE CONCAVE BASE CONTOUR MACHINED EVA TRACTION LAP CONSTRUCTION Learn More

    Regular Price: $850.00

    Special Price $749.99

    View Details

  • Liquid Force POD Wakesurf (2018)

    Key Features: -Key Features -Carbon Innegra Reinforced Deck -Carbon Tape Down Spine -CNC EPS Foam Core W/ Stringer -Single to Double Concave Vee Hull -Square Grooved Multi-Zone EVA Front and Rear Pads -Quad Fin Set-up -2 Honeycomb Carbon Side Fins & 2 Stubbie 2.0 Rear Fins Learn More

Items 1 to 50 of 54 total

per page

Page:
  1. 1
  2. 2